Handy-Carrier-Einstellungen für die Swisscom - Switzerland

- Select Settings.
- Select General.
- Select Network or Cellular
- Select Cellular Data Network.

- Under Cellular Data Option
  APN: gprs.swisscom.ch 
  Username: <blank> 
  Password: <blank> 

- Under MMS Option
  APN: event.swisscom.ch  
  Username: <blank> 
  Password: <blank> 
  MMSC: http://mms.natel.ch:8079 
  MMS Proxy: 192.168.210.2:8080 
  MMS Max Message Size: <blank> 
  MMS UA Prof URL: <blank> 

- Click Network Tab up the top to save

Note: If you do not have the Cellular Data Option then please use the
Automated Setup by going to http://www.unlockit.co.nz from your iPhone. 

Note: These instructions are very sparse. Please contact me if you have better instructions.

Depending on which model you are using, these settings may vary slightly.

Go here to automatically set up your phone via Nokia.s website.

    * To set up your mobile internet manually:

Menu > Connectivity > Destinations > Access Point > Add new Access point

You can then enter your carrier's settings for data.

    * To set up your MMS manually:

Menu > Messaging > Options > Settings > Multimedia Messaging

You can then enter your carrier's settings for MMS.

- Press Main
- Select Settings
- Select Wireless and Networks
- Select Mobile Networks
- Select Access point Names
- Delete all APN's in this section.
- Press Menu
- Press New APN
- Enter the follow settings one for General Data . The other for MMS

Name: CH - Swisscom Web
APN: gprs.swisscom.ch 
Proxy:
Port:
Username: <blank> 
Password: <blank> 
Server:
MMSC:
MMS Proxy:
MMS Port:
MMS Protocol: WAP 2.0
MCC: 228 
MNC: 01 
Authentication Type: PAP 
APN Type: default, supl

PXT Messaging MMS:
Name: CH - Swisscom MMS
APN: event.swisscom.ch 
Proxy:
Port:
Username: <blank> 
Password: <blank> 
Server:
MMSC: http://mms.natel.ch:8079 
MMS Proxy: 192.168.210.2 
MMS Port: 8080  
MMS Protocol: WAP 2.0
MCC: 228 
MNC: 01 
Authentication Type: PAP 
APN Type: mms 

The method to do this may be different . If you have better instructions please contact me.

1.	From the home screen click on the Blackberry Menu button
2.	Then select "Options" - it usually has a spanner icon.
3.	Then "Device Settings".
4.	Then select "Advanced Sysem Settings".
5.	Select "TCP/IP" from the list.
6.	Here you will find your "APN Settings". Make sure the tick-box next to "APN Settings Enabled" is ticked.
7.	Once you have done that, just below this you will see "APN:". This is where you will need to type in a setting.  Set the Following APN

APN: gprs.swisscom.ch 
USERNAME:  <blank> 
PASSWORD: <blank> 

8.	Click the menu button and select "Save".

If you have better instructions please let me know....

Click the Start (menu) button
Choose Settings from the program list
Scroll down and click Cellular
Click on the Edit APN Button

Set:

APN: gprs.swisscom.ch 
USERNAME:  <blank> 
PASSWORD: <blank> 

In the App list Click Settings
Tap Cellular

Delete any existing APN Settings..

Tap "Add Internet APN"
Tap APN and type in gprs.swisscom.ch 
Tap Username and type in <blank> 
Tap Password and type in <blank> 
Tap Save

Tap "Add MMS APN"
Tap APN an type in  event.swisscom.ch 
Tap Username and type in <blank> 
Tap Password and type in <blank> 
Tap WAP gateway (URL) and type in 192.168.210.2 
Tap WAP gateway port and type in 8080 
Tap MMSC (URL) and type in http://mms.natel.ch:8079 
Tap MMSC Port and type in 
Tap Max MMS Size and type in <blank> 
Tap IP Type and select: IPv4v6
Tap Save