Mobile Phone Carrier Settings for CMCC - China

- Select Settings.
- Select General.
- Select Network or Cellular
- Select Cellular Data Network.

- Under Cellular Data Option
  APN: cmnet 
  Username:  
  Password:  

- Under MMS Option
  APN: cmnet  
  Username:  
  Password:  
  MMSC: http://www.monternet.com 
  MMS Proxy: 10.0.0.172:80 
  MMS Max Message Size: 1048576 
  MMS UA Prof URL:  

- Click Network Tab up the top to save

Note: If you do not have the Cellular Data Option then please use the
Automated Setup by going to http://www.unlockit.co.nz from your iPhone. 

Note: These instructions are very sparse. Please contact me if you have better instructions.

Depending on which model you are using, these settings may vary slightly.

Go here to automatically set up your phone via Nokia.s website.

    * To set up your mobile internet manually:

Menu > Connectivity > Destinations > Access Point > Add new Access point

You can then enter your carrier's settings for data.

    * To set up your MMS manually:

Menu > Messaging > Options > Settings > Multimedia Messaging

You can then enter your carrier's settings for MMS.

- Press Main
- Select Settings
- Select Wireless and Networks
- Select Mobile Networks
- Select Access point Names
- Delete all APN's in this section.
- Press Menu
- Press New APN
- Enter the follow settings one for General Data . The other for MMS

Name: CN - CMCC Web
APN: cmnet 
Proxy:
Port:
Username:  
Password:  
Server:
MMSC:
MMS Proxy:
MMS Port:
MMS Protocol: WAP 2.0
MCC:  
MNC:  
Authentication Type: PAP 
APN Type: default, supl

PXT Messaging MMS:
Name: CN - CMCC MMS
APN: cmnet 
Proxy:
Port:
Username:  
Password:  
Server:
MMSC: http://www.monternet.com 
MMS Proxy: 10.0.0.172 
MMS Port: 80  
MMS Protocol: WAP 2.0
MCC:  
MNC:  
Authentication Type: PAP 
APN Type: mms 

The method to do this may be different . If you have better instructions please contact me.

1.	From the home screen click on the Blackberry Menu button
2.	Then select "Options" - it usually has a spanner icon.
3.	Then "Device Settings".
4.	Then select "Advanced Sysem Settings".
5.	Select "TCP/IP" from the list.
6.	Here you will find your "APN Settings". Make sure the tick-box next to "APN Settings Enabled" is ticked.
7.	Once you have done that, just below this you will see "APN:". This is where you will need to type in a setting.  Set the Following APN

APN: cmnet 
USERNAME:   
PASSWORD:  

8.	Click the menu button and select "Save".

If you have better instructions please let me know....

Click the Start (menu) button
Choose Settings from the program list
Scroll down and click Cellular
Click on the Edit APN Button

Set:

APN: cmnet 
USERNAME:   
PASSWORD:  

In the App list Click Settings
Tap Cellular

Delete any existing APN Settings..

Tap "Add Internet APN"
Tap APN and type in cmnet 
Tap Username and type in  
Tap Password and type in  
Tap Save

Tap "Add MMS APN"
Tap APN an type in  cmnet 
Tap Username and type in  
Tap Password and type in  
Tap WAP gateway (URL) and type in 10.0.0.172 
Tap WAP gateway port and type in 80 
Tap MMSC (URL) and type in http://www.monternet.com 
Tap MMSC Port and type in 
Tap Max MMS Size and type in 1048576 
Tap IP Type and select: IPv4v6
Tap Save